Jeff Chester Art

A blog about contemporary oil painting

Tag: Blue Ridge

My Palette

Palette copy

It is common for beginning painters to get perplexed by all of the colour choices available today for artists. How many colours do you need? Which ones are the best? As with everything in art there are no right or wrong answers here. It all depends on what you are trying to accomplish. A few artists have gone their entire careers relying on only a handful of colours. However, most settle somewhere in the range of 10-20 colours. In this post I will try to explain my palette and why each colour has a place in it. I won’t talk too much about specific brands of colour as I’ve already covered that in this post (link) but I will focus more on the pigments themselves.
First I will say a few words about limited palettes. I would define a limited palette as anything under 6 colours. Some artists like Anders Zorn take this to the extreme and use only 3 or 4. Limited palettes have advantages and disadvantages. On the plus side, it is much easier to create colour harmony when you only use a few colours. Designs with a multitude of different colours can work, but for the uninitiated less is more. Starting out with very few colours is also a good exercise in learning what mixes you can get out of the particular paints you have chosen. One possible disadvantage of a limited palette is that you will not be able to mix certain colours in the spectrum. You can work around this by planning carefully and decreasing the saturation of all the other colours in a painting in order to make a certain colour stand out, or you can just add the necessary pigment to your palette for that painting.

When I talk about colours in your palette I am really talking about colours you have at your disposal for any particular piece. I personally never have all of my available colours squeezed out on my paper palette at any one time. I work on a small area at a time and so I will only lay out the colours that are necessary to paint that area. Otherwise I would be throwing away a lot of paint. People who work quickly and cover the entire canvas in a single session such as a plein air landscape painter will usually have most if not all of their available colours laid out to save time once painting begins.

When trying to decide what paints will make up your palette the first decision to be made is to determine the look you are going for. Are you a photo realist and trying to replicate a photo as closely as possible? You might be surprised, but you should be able to get the entire range of colours in a photograph out of only 4 colours: cyan(PB 15:4), magenta(PR122, or PV19),a close to primary yellow(PY74 or PY3) and black(PBk9). This is because most photo printers only use these 4 colours to print their images. This is the way that Chuck Close creates his paintings. If you like the look of the old masters then you will want to focus mostly on the earth colours and just throw in a couple of higher keyed colours in the blue and green range. If you are trying to imitate nature perfectly then you will likely want to try and cover as much of the spectrum as possible. The first step in making a successful painting is the same as the first step in anything successful: Determine what you are trying to achieve and then create a plan to get you there.

Anyone who knows basic colour theory will tell you that you should be able to mix every colour possible using only the three primaries. This might be true in theory but in reality no paint is completely without a bias and will not always mix not as a pure primary. The way I have tackled the issue is to have a relatively large pool of colours that cover the vast majority of the colour circle and then I pull a few colours from that pool as necessary for each painting. So in general for each different painting I use a limited or semi-limited palette, but the pigments chosen for each palette change from painting to painting. I love so many things about a limited palette but to use the same 4 or 5 colours in every painting introduces problems. The big one is that all of your paintings are going to look the same. The same colour harmonies will be showing up again and again. The same accent colours and colour pairings will be used repetitively. It can get boring both as a painter and a viewer. It is much the same as a songwriter continually writing songs in the Key of G Major using a standard tuning on a guitar. It will all sound the same after a while because your options for creative problem solving are limited.
The following are the pigments that make up my full palette and why I like them:
PO73, Pyrrol Orange: This is a powerful, lightfast orange that I use when I need to punch up tints made with Cadmium Orange or when I want to add a fiery touch to a red. This is a highly saturated colour that gives a lot of versatility in mixing. Makes an interesting violet when mixed with ivory black.
PO20, Cadmium Orange Deep: This is my go-to orange. Nice and opaque and a pure orange. Like all the cadmiums it greys out in tints so that’s when I’ll use the Pyrrol Orange to punch it back up when it’s necessary.
PR254, Pyrrol Red: Also known as Ferrari red after being used on Ferarri’s from 2000-2002. It is a strong medium red that is highly saturated and holds its own when tinted. Like with Pyrrol Orange I usually use this in combination with a cadmium red when more power is needed in a tint.
PR108, Cadmium Red Light: A fiery orangey red that is very opaque and a great all around pigment.
PR122, Quinacridone Magenta: Forget Alizarin Crimson, this is the pigment to go with. Even though it is a violet shifted red it still creates strong oranges when mixed with yellow and beautiful violets and purples with blues. This makes it very versatile. If I want to balance out its transparency I’ll add a little bit of Cad Red Deep to mitigate this.
PR108, Cad Red Deep: A darker cherry red that is very opaque and useful in shadow areas or to mix lower key violets and purples.
PV14, Cobalt Violet: A semi-transparent expensive colour. It is not a strong tinter which I actually see as a strength because it makes it useful to tone down yellows without blowing them apart or to give a slight violet edge to blues or reds. Used by itself it is a perfect violet and much more lightfast than dioxazine purple.
PB29, Ultramarine Blue: This pigment seems to make it into almost everyone’s palette. It is inexpensive and a very beautiful colour. That said I find I don’t actually use it very much. Mostly I’ll use it to shift Cobalt blue ever so slightly more to the warm side if needed. Brand matters with Ultramarine Blue because it can be a very stringy pigment if no additives are added which of course can be a godsend or the bane of your existence depending on how you paint.
PB28, Cobalt Blue: A pure blue very close to a “primary blue” with just the smallest touch of red shift. This is my basic blue that gets used as a starting point for most mixes. Expensive, but worth it.
PB15:4, Pthalo Blue Green Shade: This is a very powerful colour. Be careful when adding this into the mix as you are likely going to blow everything apart unless you use tiny dabs. For mixing I find it more useful with a bit of titanium white added beforehand to knock back the tinting power a bit. I mostly use Pthalo Blue when I need to add some power to one of the mineral blues. It is a very saturated colour and keeps its power in tints and can give you some very unnatural blues and greens which can be a good or bad thing of course depending on the look you are going for.
PB35, Cerulean Blue: Usually one of the most expensive pigments in a manufacturers offerings I use it because I find no mix quite matches the hue of Cerulean Blues unmixed masstone. It’s a great starting point when painting water and blue skies.
PB36, Cobalt Turquoise: I use Blue Ridge Artist Colors Cobalt Turquoise which is a green shifted turquoise. It’s very opaque and has many uses and bridges the gap between blue and green really nicely.
PG17, Chrome Green Oxide: This is a super opaque mid green that is fairly muted but makes a very good starting point for natural looking greens. Very useful for floral or landscape painting you could easily use this in portraiture as well however. If I could have only one green this would be it.
PG23, Terre Verte: This is one of my favourite colors. This is the true green earth pigment, not a mix that is supposed to simulate it. Very useful for glazing it also makes a perfect mixer due to its extremely low tinting strength. It will neutralize and calm down reds without browning them out too much and it’s useful for adding to blues when you want a subtle green shift. Also good if you want to make a colour slightly more transparent and cooler at the same time.
PY53, Nickel Titanium Yellow: This is a cool dull yellow that is opaque. I don’t tend to use it very often but it can be useful when you want to make light opaque lime greens. It’s a good one to have around as well to cool off greens or dull violets.
PY41, Naples Yellow Light: This is a pigment that most manufacturers don’t carry and is generally quite expensive. I like it as it is a relatively fast drying light yellow. Similar to Nickel Titanium Yellow but less cool and a little bit deeper.
PY35, Cadmium Yellow Deep: I use Blue Ridge Artist Colours CYD which is equivalent to most other lines CY medium. It is a warm yellow that is really a staple for me. Makes great olive greens with ivory black and is useful when you need to warm things up.
PY41, Naples Yellow Deep: A warm yellow-orange ochre colour. I find this is a good one to add to yellow ochre to make it a bit more palatable and knock back the strength a bit. Not one I use a lot, but it has its place when painting gold objects.
PY42, Yellow Ochre: This is Blue Ridge’s synthetic iron oxide yellow, not a natural yellow ochre. I use this more as a convenience colour so I don’t have to mix a dull yellow.
PR101, Mars Red: There are many many versions of this pigment out there. The one I use is Blue Ridge’s which is a very strong orangey-brown-red. Like the yellow ochre I use this mostly out of convenience when I need a basic orangey-brown starting point to mix from.
PBr6, Burnt Umber: PBr6 is the synthetic version of burnt umber, not the natural earth. I like it because it is more opaque which works well for my method of painting. It is a nice chocolate milk brown that is great in getting backgrounds to look like those of the old masters.
PBk9, Ivory Black: This is my most used black and the one I mix with the most. It isn’t an overly strong tinter like mars black so it’s useful when blending dark greys into lighter colours as you won’t have them overpowered. This is a very oily colour and a very slow drier however so it shouldn’t be used straight for underpainting which being mixed first with some lower oil content paint like lead white.
PBk11, Mars Black: I don’t use this colour very often. I find it is too strong of a tinter to mix well, but I keep it on my palette for when I want a nice dark black background. It is much leaner than ivory black and so I will first paint the area in mars black and then glaze ivory black on top to get a deep dark black.
PBk28, Black Spinel: This is a new addition to my palette and I haven’t really had time to fully explore it. It is supposed to be a true neutral and is more expensive than the carbon black pigments. I don’t expect this one to replace ivory black, but depending on how it goes it might be a good fit for my style instead of Mars Black.
Whites:
PW6: Titanium White: If I could only have one white this would be the one I would choose. A lot of people don’t like the chalkiness and tinting power of Titanium white but it works well for me. I really like opacity and this is the go-to pigment for adding opacity. I like the pure PW6 versions of titanium white, rather than those with zinc white added.
PW1: Lead Carbonate: This is my second most used white. In fact most of the time my general mixing white is a combo of PW6, PW1 and sometimes some PW3 as well. When mixed with Titanium white this pigment will warm the titanium up ever so slightly, speed the drying a bit and add some strength to the paint film.
PW3: Lead Sulfate: This is a newer addition. I get this from Blue Ridge who mixes it with some titanium white and calls it Flemish White and quite like it. It is a much faster drier than Lead Carbonate so it is good for those situations when you need a quick drier. I’m not a huge fan of the consistency of the paint as it is so I’ll usually mix it with PW1 and PW6 for general use.
Am I worried about the health implications of using lead paints? Nope. Lead containing oil paint is only dangerous if you do the following: 1) eat it, and 2) inhale the pigment either in unbound dry powder form or the dust from sanding dried lead white paint. I don’t eat or smoke in my studio (don’t smoke at all actually) and I wash my hands fastidiously after painting. I also don’t sand down paintings, or make my own paints but for those who do this is a valid concern. I totally get why lead white is banned in house paints and I agree with that restriction. House paint is usually left on walls for long periods of time and will eventually flake off and be crumbled into dust or small particles that children can ingest. Oil paint for artistic purposes is a different matter altogether however and if used responsibly and kept out of reach of children can be totally safe.
Here are a couple examples of my paintings and the more limited palettes I chose from my full roster for each one:

D44_2090

“Love you to Death” Oil on Polyester Canvas, 24 x 30 inches.

Pigments used: Lead White (carbonate and sulfate), Titanium White, Ivory Black, Pyrrol Orange, Cad Red Light, Cad Red Deep, Quinacridone Magenta, Cobalt Blue.

D44_2096

“Leaving Home” Oil on Panel, 24 x 24 inches

Pigments Used: Lead Carbonate White, Titanium White, Ivory Black, Naples Yellow Dark, Burnt Umber, Quinacridone Magenta, Cobalt Violet, Cobalt Turquoise, Cobalt Blue, Chrome Oxide Green

D44_2086

“The Offering” Oil on Panel, 24 x 30 inches

Pigments Used: Lead Carbonate White, Titanium White, Ivory Black, Cad Yellow Medium, Mars Red, Quinacridone Magenta, Cobalt Violet, Cobalt Blue, Chrome Oxide Green

D44_2093

 

“The day you told me that you loved him” Oil on Panel, 24 x 30 inches

Pigments Used: Lead Carbonate White, Titanium White, Ivory Black, Naples Yellow Light, Cad Yellow Deep, Cad Red Light, Cobalt Blue, Chrome Oxide Green, Terre Verte, Burnt Umber

 

Oil Paint Brand Reviews

Paint

Edited 19 April 2018Updated info on Williamsburg Oils and a move for them to my #2 spot. 

Over the years I’ve collected quite a few tubes of paint from several different manufacturers. I haven’t tried them all, just those that I thought would work with my style of painting. I am not paid by any of these paint makers and have no stock in any of their products. This is just my opinion as an artist. If you are less-than-expertly knowledgeable about how oil paints are made and what they consist of I would suggest that you start by looking at Tony Johansen’s webiste: www.paintmaking.com

First, I’ll list the attributes that I look for in a good oil paint:

Oil used: There are only two oils that I would consider using as the base for the creation of a durable painting: Linseed oil and Walnut oil. Linseed oil is the industry standard and for good reason. It creates the strongest film and drys relatively fast when compared to other drying oils. Walnut oil is a good alternative to linseed oil. It does not form quite as strong of a film as linseed, however it will yellow less over time and gives paint a juicy, brushable quality. Walnut oil, although slower drying than linseed, is still faster than other oils.  Ideally the best paint would be made from a mix of the two in an attempt to get the best of both and reduce each others negative qualities. Some manufacturers use poppy and safflower oils in their paints, particularily in the lighter colours and whites. They do this because poppy and safflower oils yellow less than linseed oil in the short term. However they are much slower drying, and do not form as strong of a film and so I don’t typically use paints made with these oils except in the final layers with the addition of some sort of alkyd medium to improve strength.  I should note here that eventually all oil paint films are going to crack, it’s just a matter of when.

Pigment info: Most professional quality paint manufacturers are good about listing the pigments in the tube. They do this either on the tube itself which is ideal, or on their webpage.  If a manufacturer doesn’t state the pigments used in the paint anywhere then beware! Each pigment has it’s own special characteristics that include drying time, transparency, tinting strength, and hue bias. Knowing the properties allows you to come to informed decisions about the pigments that make up your palette. Some pigments cost more than others, so it is good to know what you are paying for. Taking a gamble on a paint manufacturer that doesn’t list pigments is likely to end in disappointment. For detailed information on specific pigments beyond what is listed on paintmaking.com there are a couple of terrific sites:

www.artiscreation.com

www.handprint.com

Brushability: In what I consider the ideal paint the mixture that comes out of a tube should be soft and workable. Not soupy and runny, and not stiff and dry. Different artists will have a preference for different qualities in this regard and most of that is determined by how thickly you like to apply paint to the canvas.

Transparency: I am not talking about the characteristics of the pigments here, I am talking about the information given out by the manufacturer and how open they are to honest discussion should you have questions. Although there are standards put in place like ASTM D4302  these are entirely voluntary and there is no enforcement of these standards. This means that artists are left to try and figure out whose information and product they trust the most. First off, people would not be selling paint if they didn’t want to make money at it. That should be a given so there should always be some skepticism when dealing with manufacturer statements. You need to be wary of the marketing romance and stick to the facts and scientific evidence. So where do you start here? Well, I look for the company to be led by an artist. If they don’t have any experience painting there is no way they will be able to put the kind of passion and time into the creation of a paint that is required to make something a real artist will love.

Lightfastness: Almost all paint manufacturers still produce Alizarin Crimson (PR83:1). This is because there is still a high demand from artists in general. If you look at any “how-to-paint” book they will most likely recommend Alizarin Crimson for a basic palette. Because of this I can forgive novice painters for buying it and manufacturers for making it. It is indeed a beautiful and useful colour right out of the tube. However, it is what is called a “fugitive” colour in terms of how it stands up to the test of time with regards to it’s colour strength. There are many other pigments that can easily fill the role of Alizarin Crimson and I will talk about those in an upcoming post on what pigments should be on your palette. So, as I said I can forgive manufacturers for still producing Alizarin Crimson. What I can’t forgive however, is when they produce a line of paints full of pigments with poor lightfastness ratings. If they have lots of paints with an ASTM lightfastness rating of 2 or worse that should be a sure sign that the company isn’t overly concerned about the longevity of your work. This can also be said about a company that puts out the majority of it’s colours as mixes of 2 or more pigments. Although some mixes can be really convenient and useful, having an entire line of mixes smells of marketing B.S. more than it smells of linseed oil.

Price: You are going to pay more for a quality paint than for a student grade paint. More pigment in a tube costs more money to make than less pigment. That is certain. However, beyond a certain point you will be paying only for the name and for the marketing romance. This can be seen in many industries, but is probably most obvious in the clothing and accessory world. Many people will pay more money for the same product if it has a certain brand stamped on it. Watch for this because it exists in the world of paints as well. Extremely good paint can be found for a decent price.

Tube quality: I hate it when caps split or tubes break open and paint oozes all over my other tubes. This can be messy and costly and so I prefer to buy paint that comes in decent packages.

The following list is what I consider great paint. I won’t include certain lines that make the tops on many peoples lists because they don’t meet the criteria above (Blockx for example uses poppy oil and so I’ve never used it cause it would dry way too slow for me)

Blue Ridge Artist Colors: In my opinion this is tops. Made in North Carolina by a guy named Eric Silver, Blue Ridge paint meets almost every aspect of what I consider a terrific paint. Eric uses a blend of linseed and walnut oil to mix almost all of his colours (except for his whites which are walnut/safflower). They are blended to a smooth, brushable consistency. Pigment and paint information is readily available on the website. The vast majority of colours that Eric has chosen for his line are lightfastness I. The tubes he uses have not given me any trouble what-so-ever. I really enjoy the wider mouth on them as well. You can’t buy these paints in store, only online through their website. This is not really that inconvenient however as the service is extremely fast and Eric takes such good care at packaging the paint that it has arrived in perfect condition. In fact the tubes I have received were each individually wrapped in bubble wrap and placed in a box just big enough to keep them snug so they didn’t rattle against each other in transit. I am a paint geek. I love every little nuance about paint and using quality materials really affects how I feel about creating. So when paint shows up in pristine condition along with a colour chart and a little thank you note like it does from Blue Ridge I just know that he “gets it”. I’ve ordered a few times now and each time my order was acknowledged, filled and shipped within two days. I have to pay for international shipping as I am Canadian but the quality and price of the paints is more than reasonable enough to make it worth it. The colours are very highly pigmented and the pigments chosen are very beautiful. The majority of my palette is made up of Blue Ridge oil paint. There is a great video of Eric making paint in his workshop that can be viewed here.

Williamsburg Handmade Oil Paint: Williamsburg is a great brand of oil paint. They are a pricier paint which is a detractor, though I don’t think they are necessarily excessively expensive (unlike Old Holland and Vasari). They do have a great selection of earth colours if you are an earth colour junkie and a couple of different Terre Vertes (PG23) which happens to be my favourite oil colour. One thing that used to bother me, that they have recently addressed, has to do with Zinc White. They used to use Zinc in a lot of their mixtures but recently removed it from their lineup. A very smart move in my opinion and that goes a long way to showing me that they are really trying to make a quality product for artists to use.  They are also concerned with lightfastness ratings and have made changes in the past to address any issues they have found.  Overall I rate Williamsburg as an excellent paint, only falling to #2 on my list due to the price point.

Gamblin: Gamblin is a solid brand. I have written to them before and they were very quick to respond and answered my questions clearly and fully. Gamblin paint is widely available and this makes it a great choice for those looking for ease of purchase or hunting for the best price. Gamblin paints are slightly softer than Blue Ridge.  This could be a big problem however if you want to create thick sticky impasto passages. Of all the paint brands I’ve tried I would say on the whole Gamblin has chosen the most beautiful pigments out there. For this reason I buy Gamblin paints for many of my transparent colours. I have never had any issues with Gamblin tubes. If you were only going to use a single brand of paint to fill out your entire palette then in my opinion the Gamblin lineup has a few flaws. The use of Napthol Reds instead of the more lightfast Pyrrol reds leaves a gap in the spectrum for me and the same with the use of Hansa yellows instead of the superior Benzimidazalone yellows. Overall though I think Gamblin paint is a great brand which is good enough for professional use but affordable enough for student use. Robert Gamblin’s vision for paintmaking can be seen in this video.

Rembrandt Oil Colours: Rembrandt is a good brand of paint overall. Their paints are all have excellent lightfastness. The paint is very soft and brushable right out of the tube. If you love natural earth colours then this is not the brand for you. Their earth colours are actually made up of mixes of synthetic iron oxide pigments and ivory black. My guess for doing this is that they are concerned about mining practices or a tendency for umbers to darken over time but I haven’t actually seen this written anywhere. The biggest negative about these paints is the tubes. They seem to be much too thin and I have several that have burst open on me. You can usually get a good deal at dickblick.com  for these paints and so I would highly recommend them to budget concious artists and students. If you are looking for a good selection of colours around the colour wheel and yellows and reds in transparent versions Rembrandt has you covered.

Winsor & Newton Artist Oil Colors: Winsor Newton is a good brand. You can find these paints pretty much anywhere. If there is only one brand of artist oil paint in an art store you can bet it is probably Winsor Newton. They have a good range of colours, are nice to work with out of the tube, and are generally very nice hues. The only negative for me about Winsor Newton is that the company is too big. The paint is made on a production line and machines do much of the work. Although this gives them lots of opportunity for reproducible quality control it also puts a distance between the maker and the product. I just don’t feel as though as much love and thought has gone into this product. I’m going to admit that this seems like a silly thing to say, but it does affect how I feel about working with the paint. Rationally speaking I think the paint is fine and so if this kind of touchy feely thing doesn’t bother you I think you will find that this paint makes for a solid choice you could use with confidence.

Michael Harding Handmade Artist Oil Paint: In the recent past Michael Harding has had an issue with the caps splitting on their tubes, but they will send you replacement caps should you require them. There are a few paints that I love from Michael Harding. Their Terra Verte is the most beautful of the ones I’ve tried and is my staple transparent earth green paint. Harding’s Permanent Orange (PO73) is a lovely brilliant colour that is very strong and very useful. As well, they make a Lead White/Titanium White blend ground in linseed oil which is great. Michael Harding makes a few unique colours that you can’t find anywhere else. Their Genuine Naples Yellow Light is a fast drying light primary yellow I use which is worth the price in my opinion. It is a rarer pigment and also most yellow pigments are very slow drying. I haven’t had a chance to try their Genuine Vermillion or Genuine Lapis Lazuli but from the colour swatches on their website I would say both are easily mixed with much less expensive colours and are not special enough to justify spending $100 on a 40ml tube of paint. I am perplexed by some of the choices of pigments in this range of paints as well as the rationale behind chosing them. For instance if you read the description of his Alizarin Crimson he talks about uptight Americans poo-pooing the pigment because of it’s lightfastness and how they should relax yet for his Crimson Lake paint (PR149) he says he is looking into a new pigment to replace it due to it’s lightfastness even though it is lightfastness 1 in mass tone and 2 in tints. Overall I pick and choose from this line of paints as he does make a few good ones.

Old Holland: There is only one colour from Old Holland that I think is better than other brands and that is their Manganese Blue (PB33). This is only because they are one of the only ones to still produce any since the pigment is no longer manufactured. I saw a comment online from someone stating that they had bought a large enough quantity that they should be good for 100 years of production but when I emailed the company months ago asking to verify this I got no reply. The price of the paints is much too high for what you get. Don’t get me wrong, the paint is good, and if you like a really really stiff paint then you will love the texture, but in my opinion they are not worth the price you have to pay for them. If you want to try them out start out with a few of the A series colours to get an idea as they are reasonably priced. I have a couple of the cadmiums and cobalts and I have to say that they are no better than Blue Ridge paints which happen to be half the price. Another thing I don’t like about Old Holland paints is that they give a blanket lightfastness to their line (they say 7 or 8 on a 1-8 scale where 8 is best) that does not fall in line with ASTM testing (or any other manufacturers testing for that matter) of the pigments. They also make way too many mixtures and useless colours. It seems to me they are just catering to those with a fetish for collecting every tube of paint they make. If you like a really stiff paint then these are for you but overall you can get more beautiful hues, the same amount of pigment, and more honesty for less money elsewhere.

Vasari Classic Artist Oil Colors:  I haven’t used any of Vasari’s colours.  This is because I find their prices are astronomical, and their information and customer service is severely lacking.   On their website you will notice that as you look at each colour you will only find the pigment information for a few.  This information it appears is only for the single pigment paints.  I wrote them an email to ask if I could see a chart or get information on their pigments in all of their paints.  They didn’t respond to that email, but I know they got it because they added me to their distribution list for their mass emails.  I sent another email about 3 months after the first one thinking maybe they just forgot to respond but yet again no response. I know that David Kassan swears by these paints, but I just can’t help but think that no matter how good they are these must be the most over priced paints out there. For instance you will pay $68.25 US dollars for a 40ml tube of their Cerulean Blue.  The kicker is that it isn’t even a PB35, they use the cheaper PB36 and still charge the big bucks for it.  A 40ml tube of their ivory black will run you almost 21 dollars.  Insanity. Vasari is the Gucci of the paint world.

%d bloggers like this: